![\"\"\/](\"https:\/\/img.alicdn.com\/imgextra\/i3\/158297379\/O1CN01AiA81r24NdIBDD3HM_!!158297379.jpg?t=1637588886000\")
<\/a>In the first place, HD107S-2020-RGB is an embedded control type LED light source integrating a control circuit and light-emitting circuit. It contains a signal decoding module, data buffer, a built-in constant current circuit, and RC oscillator; CMOS, low voltage, low power consumption; 256 level grayscale PWM adjustment and 32 brightness adjustment; use the double output, Data, and synchronization of the CLK signal, connected in series each wafer output action synchronization. <\/p><\/blockquote>\n\n\n\n
LED chips HD107S<\/figcaption><\/figure>\n\n\n\n <\/a>
HD107S Rigid LED strip lights<\/figcaption><\/figure>\n\n\n\n Features: <\/h2>\n\n\n\n
1) LED internal integrated high-quality external control line serial cascade constant current IC; 5V application; default on electric lights;
2) Two-wire synchronous control, Data wire and Clock wire.
3) RGB output control, 8Bit (256) color; 5Bit (32) to adjust the brightness;
4) Three constant current drive, self-detection function-specific signal
5) The maximum frequency of 40MHZ serial data input
6) Double data transmission, built-in support uninterrupted oscillation PWM (27Khz) output, can maintain a static image. <\/p><\/blockquote>\n\n\n\nSize and definition: <\/h2>\n\n\n\n
Size is 2.0 x 2.0 x 0.78 (mm)<\/center><\/strong><\/figcaption><\/figure>\n\n\n\n HD107s is a digital control LED light source which integrates the control circuit and RGB LED chip in one package, and it provides the best full-color lighting performance for RGB digital dimming control.
Firstly, It featured a two-wire SPI interface instead of the proprietary one-wire protocol like WS2812, and many micro-controllers can drive it with their hardware SPI functions easily.
Secondly, HD107s has a bigger improvement to the digital RGB LED of APA102 and APA107, which support 256 (8bits) grade color depth in R\/G\/B.
Thirdly, It can operate at a clock frequency of over 30MHz thus allowing a super-fast data transmission rate.
Requiring a minimum number of external components, HD107s is not needed a decoupling capacitor at its power input pin. and it is compatible with a standard 6-lead 2020 package.
Lastly, HD107s internally include intelligent digital port data latch, signal reshaping amplification drive circuit, and a programmable constant current driver for RGB LEDs, effectively ensuring the pixel point light color consistent. <\/p><\/blockquote>\n\n\n\nPIN Configuration: <\/h2>\n\n\n\n
<\/figure>\n\n\n\n
1) CMOS process, low voltage, low power consumption
2) Higher brightness efficiency, large lighting beam
3) Pure cooper bracket and Pure Gold lead inside
4) Built-in high precision and high stability oscillator
5) Built-in sleep function, no work no electric consumption PWM refresh rate at 27kHz
6) Maximum Clock drive frequency \/ CKI: 40MHz in laboratory condition
7) 8bits (256 grades) Grayscale, 5bit (32 levels) brightness adjustment for each R\/G\/B color <\/p><\/blockquote>\n\n\n\nApplications: <\/h2>\n\n\n\n
LED lamp, LED Strip, LED pixel module, LED billboard, LED screen…<\/p><\/blockquote>\n\n\n\n
Typical application circuit: <\/h2>\n\n\n