Allcoola Digital LED Strips

WS2815 | WS2813 | SK6812-4020 | APA102 | DMX512 RGB RGBW Digital LED Strips | SMD2110 | RGB+CCT

High PWM 144 LEDs/m HD107S APA107S APA107 Digita LED Strip Light

High PWM 144 LEDs/m HD107S APA107S APA107 Digita LED Strip Light


APA107 LED Chip is a real product which can replace APA102/APA102C exactly, have many China factory and trade company use SK9822 to pretend APA107.

Addressable RGB Pixel APA107 Digital LED Strip Light, 144 Pixel LED Strip, with DATA and CLOCK Seperately, 144led/m, 144pixles/m, DC5V, 43.2w/m, 12mm white/black FPCB, IP20 or the other waterproof grade, 1m/roll, with 3M adhesive tape backed, a real product which can replace APA102/APA102C.

Data sheet:

  Product:   High PWM 144 LEDs/m HD107S APA107S APA107 Digita LED Strip Light
  Item No.:    WTP-APA107-144-1205 
  LED:    APA107-SMD5050-RGB-144led/m
  View angle:   120°
  IC Chip:   APA107
  Input voltage:   5V
  Power:   43.2w/m
  Size:   1000x10x2.0(mm), 1m/roll


> CMOS process,low voltage ,low consumption
> Synchronization of two-lane
> Choose positive output or negative RGB three-color LED output
> 8 bit(256 level) color set ,5bit(32 level) brightness adjustment
> Build-20ma constant current output
> With self-detection signal build in support for continuous oscillation PWM output ,can be maintained static screen


> Widely used for home decoration use, hotels, clubs, shopping malls
> Architectural decorative lighting, boutique atmosphere lighting
> Extensively applied in background lighting, concealed lighting, channel letter lighting
> Emergency & security lighting, advertisement sign lighting
> Decorative lights for holiday, event, show exhibition
> Applicable for automobile and bicycle decoration, border or contour lighting


1) Do not use any acidic, alkaline adhesive fixing Product;
2) It is prohibited to make products with a hard object collision, friction;
3) Do not use your fingers to press LED;
4) Don’t make positive and negative reversed;
5) Don’t install when product is working;
6) Installation, repair and maintenance must be made by professional Person;
7) Before you use them make sure the power supply voltage to meet the requirements and wire connection correctly.

Order Info: (IP20/IP65/IP67/IP68)

SN Model Number LED Qty Pixel Qty PCB Width Operate Voltage Power Packing
1  WTP-APA107-30 30led/m 30Pixel/m 10mm 5V 9.0w/m 5m/roll
2  WTP-APA107-60 60led/m 60Pixel/m 10mm 5V 18.0w/m 5m/roll
3  WTP-APA107-96 96led/m 96Pixel/m 10mm 5V 28.8w/m 5m/roll
4  WTP-APA107-144 144led/m 144Pixel/m 12mm (4oz) 5V 43.2w/m 1m/roll

Photos show:

IP20 vs IP65
IP20 VS IP65
IP67 waterproof with clear weatherproof silicone tube
Light the APA107 led strips 30pixel/m and 60pixel/m by K-1000C

The difference of APA102, HD107S APA107S and SK9822?

APA102: 20+ kHz PWM, transmission rate 20MHZ
APA107: 9 kHz PWM, transmission rate 30MHZ
HD107s: 26+ kHz PWM (the upgrade of APA107), transmission rate 40MHZ 
SK9822: 4.7 kHz PWM, transmission rate 15MHZ
In conclusions, APA107/HD107s  is one real product which can replace APA102.


V+: Power output. Typically 5V but up to 12V supported for LEDs that require it. Required if powering via USB or the onboard power jack. But can be left disconnected if power is connected elsewhere.
GND: Common ground. Even if not using USB or the power jack on the AllPixel for power, this connection is required so that the DATA and CLK pins have a ground reference.
CLK: The clock pin for chipsets that require clocked data. Refer to the table below to know if your chipset requires it.
DATA: The pixel data output pin and required by all chipsets.

Basically, all chipsets will either have 3 or 4 connections. 2 are always for ground and power. If there are 3 total wires, only DATA is required but if there are 4 wires, both DATA and CLK are required.

Get in touch with us now

Tags: ,